Filter
Top Products
19
Installing the Cooker
Safety warnings about installation
• The cooker MUST be installed and serviced by a qualified technician.
• A Certificate of Compliance MUST be supplied to be kept by the customer.
• The packing materials MUST be removed before you install the cooker.
• You MUST follow the installation instructions in this booklet.
• The surrounding kitchen cabinets MUST be able to withstand 85°C.
Electrolux Products WILL NOT accept responsibility for damage caused by installation into kitchen cabinets
which cannot withstand 85°C.
• The appliance MUST be installed using the flexible hose supplied.
• The vents, openings and air spaces MUST not be blocked or covered.
• You MUST not pull the cooker by the door handles or the splashback.
• The cooker MUST be checked every five years.
Locating the cooker
Study the diagrams below to be sure of the dimensions required to locate the cooker safely.
NOTE: Make sure that the top of the hotplate surface is at least 10 mm higher than the level of the benchtops.
IMPORTANT: Before you cook in your new oven it is important that the protective oils used in the manufacture of the
product be removed.
• Make sure that the room is well ventilated (to allow smoke to escape).
• Run the grill on high for 15 minutes.
• Then run the oven on 220° for 4-8 hours.