Electrolux EW30GS65GS Range User Manual


 
16

PLACEMENT OF BURNER HEADS AND CAPS
LOCATIONS OF THE BURNERS

Place the burner head over the gas orice (Figure 1). 
 Make sure electrode ts correctly into slot
in burner head.
Figure 1
The cooktop is equipped with different sized burners.
The surface burners are located on the cooktop as follows (See
Figure):
- a (natural gas) burner located at the right rear
position;
- a (natural gas) burner located at the right front
position;
- a (natural gas) burner located at the left front position;
- a (natural gas) burner located at the left rear
position.
PROPER BURNER ADJUSTMENTS
The color of the ame is the key to proper burner adjustment. A good ame is clear, blue
and hardly visible in a well-lighted room. Each cone of ame should be steady and sharply
dened. Adjust or clean burner if ame is yellow-orange. To clean burner, see instructions
under General Care & Cleaning.

Place a burner cap on each burner head (see
Figure 2), matching the cap size to the head
size. The cap for each burner has an inner
locating ring which centers the cap correctly
on the burner head. Be sure that all the burner
caps and burner heads are correctly placed
BEFORE using your appliance.
Make sure each burner cap is properly aligned
and level.
Turn the burner on to determine if it will light.
If the burner does not light, contact a Service
Center. Do not service the sealed burner
yourself.
Figure 2

Cap



Cap


Gas
Opening
Electrode