Filter
Top Products
13
To fill:
1. To fill with salt, unscrew the cap of the
salt container.
2. Pour half a litre of water inside the container (this is necessary only before
filling with salt for the first time).
3. Using the funnel provided, pour in the
salt until the container is full.
Do not worry if water overflows from the
unit when filling with salt, this is quite
normal.
4. Replace the cap making sure that there is
no trace of salt on the screw thread or on
the gasket.
5. Screw on the cap tightly.
When this has been done, all that is required is to periodically top up the container
with salt.
You are reminded of this by the salt indicator light on the control panel which will
illuminate when the salt has finished.
Important!
The salt refill indicator light on the control panel can remain illuminated for 2-6
hours after salt has been replenished, assuming the dishwasher remains on. If you are
using salts that take longer to dissolve then this can take longer. the function of the
dishwasher is not affected.
SALE
SALT
SALZ
SEL
SR14
152983 79/2 8-02-2002 17:22 Pagina 13