Filter
Top Products
25
8a. Set and start the programme without "DELAY START"
● Select the wash programme by simply pressing one of the programme push
buttons, the display will show the running time of the programme in minutes
and the indicator lights of the phases corresponding to the programme will
illuminate.
● If necessary select the "SMALL LOAD" by pressing the corresponding push
button (in this case the running time of the programme will be adjusted).
With the selection of the programmes "QUICK 50°" and "PREWASH" this option
is not available.
● If the setting of the programme has been made with the door opened:
close the door and the programme will start automatically after 5 seconds.
While the door remains open you still have the chance to modify the setting
made.
● If the setting of the programme has been made with the door closed:
the programme will start automatically after 5 seconds from the last pressure of
a push button.
● The starting of the programme will be confirmed by an audible signal, the
indicator lights of the phases turn off except for the light of the phase under
way. The displayed time will start to decrease from minute to minute.
8b. Set and start the programme with "DELAY START"
● Select the wash programme by simply pressing one of the programme push
buttons, the display will show the running time of the programme in minutes
and the indicator lights of the phases corresponding to the programme will
illuminate.
● If necessary select the "SMALL LOAD" by pressing the corresponding push
button (in this case the running time of the programme will be adjusted).
With the selection of the programmes "QUICK 50°" and "PREWASH" this option
is not available.
● Press the "DELAY START" push button, in the display appears h1. Select the time
by repeatedly pressing the "DELAY START" push button until the required
number of hours appear in the display. You can delay the start of a programme
up to a maximum of 12 hours (h12).
To cancel the setting of the delay start press the push button until the running
time of the selected programme reappears in the display.
● If the setting of the programme has been made with the door opened:
close the door and the dishwasher starts the countdown automatically after 5
seconds. The number of hours to go before the programme starts appears in the
display and decreases from hour to hour. The letter h flashing in the display
indicates that the delay start is active.
152983 79/2 8-02-2002 17:22 Pagina 25