Filter
Top Products
31
...problems occur during use of the dishwasher
Malfunction
The programme does not
start
The machine is noisy
The door is difficult to
close
The plug is not properly
inserted in the power
socket.
The dishwasher has not
ended the previous washing
cycle. (See paragraph
concerning "At the end of
the washing programme".
Insert the plug.
Cancel the previous setted
programme.
There is a power failure.
Dishes are rattling against
each other.
The spray arms are
knocking against the
dishes.
The dishwasher is not level,
or not properly built-in.
Load correctly crockery,
cutlery, pots and pans.
Refer to "Loading cutlery
and dishes"
Refer to "Installation"
instructions.
Check the fuse.
Possible cause Remedy
...the wash results are not satisfactory
Visible lime deposits or white film on the dishes
● Check that the right level of the water softener is set.
● Check that there is salt.
The dishes are not quite dry
● The rinse aid has run out or too little is being used.
The dishes are not clean
● The baskets are too full.
● The dishes have not been arranged properly.
● The spray arms do not rotate because of incorrect loading of the baskets.
● The filters are clogged.
● The filters are not in position.
● Not enough detergent has been used or it is unsuitable.
● The detergent is old or has gone hard.
● The salt container cap is not properly closed.
● The washing programme is too gentle.
152983 79/2 8-02-2002 17:22 Pagina 31