Filter
Top Products
27
Interrupting or aborting a dishwashing cycle
Only interrupt a dishwashing cycle that is in progress if it is absolutely
necessary.
Interrupting the dishwashing programme by opening the dishwash-
er door
1 Hot steam may escape when the door is opened. There is a risk of scald-
ing.
1.Open the door carefully. The dishwashing cycle will stop, in the display:
PLEASE CLOSE DOOR
2.Close the door. The cycle will continue.
Aborting the dishwashing cycle
1.Press the RESET button.
In the display: CONFIRM CANCEL ?
2.Press the OK/START button.
The programme is cancelled. In the display: CHOOSE PROGRAMME
3.If you want to start a new dishwashing cycle, check whether there is
any detergent in the dispenser.
3 Turning off the dishwasher will only interrupt a selected dishwashing
cycle, not cancel it. The cycle will recommence after turning the dish-
washer back on again.
Setting the delay start
3 With the delay start you can delay the start of a dishwashing cycle for
between 1 and 19 hours. First of all set the delay start and then the de-
sired dishwashing cycle.
1.Go to the DELAY START option; see section “Adapting an option/set-
ting”.
2.Set the period by which you wish to delay the start in hours.
In the symbol line of the display .
3.Press the OPTION button, to change to the Programmes menu.
4.Select programme and start.
First of all the pre-set time delay until the start runs down. In the dis-
play you see the time remaining until the start of the dishwashing cy-
cle. After the time delay until the start has elapsed, the dishwashing
cycle starts automatically, the symbol goes out.