Filter
Top Products
32
If the dishwashing results are not satisfactory
The dishes are still dirty.
• The wrong dishwashing cycle was selected.
• The dishes were loaded is such a way that the dishwashing water did
not reach all items. The baskets for the dishes must not be overload-
ed.
• The filters in the base of the washing compartment are dirty or incor-
rectly positioned.
• Good quality detergent was not used, or too little was used.
• In the case of scale deposits on the dishes: The special salt dispenser is
empty or the water softening system has been incorrectly set.
• The drain hose is incorrectly positioned.
The cycle is not starting.
The mains plug is not
plugged in.
Plug in mains plug.
A fuse in the house’s wiring
system is defective.
Replace fuse.
For dishwasher models with
a delay start timer:
A start time has been select-
ed.
If the dishes are to be
washed immediately, cancel
the delay start.
Rust spots are visible in
the dishwashing com-
partment.
The dishwashing compart-
ment is made from rust-free
stainless steel. Rust spots in
the washing compartment
are due to rust particles
from external sources (rust
particles from water pipes,
pans, cutlery, etc.). Remove
such spots with a commer-
cially-available cleaning
product for stainless steel.
Only wash cutlery, dishes and
pans that are suitable for
dishwasher use.
A whistling noise can be
heard when washing
dishes.
The whistling is not a cause
for concern.
Use a different brand of de-
tergent.
The dishwasher interior
light does not come on.
The mains plug is not
plugged in.
Plug in mains plug.
The bulb in the interior light
is faulty.
Contact the Customer Care
Department.
Malfunction Possible cause Remedy