Filter
Top Products
14
To Remove/Replace the Char-
coal Filters
• First remove the metal grease filters.
• Remove the saturated activated charcoal filter by releasing
the fixing hooks as illustrated.
• Position the new charcoal filter in the position marked
and while holding the filter replace the fixing hooks as
illustrated
Reset the alarm signal
• Stop the motor.
• Press the touch control F for at least 4 seconds,
until the touch control T1 flashes.
This appliance can be a possible fire hazard if
the grease and charcoal filters are not cleaned
and replaced as recommended.
Changing the Halogen Spot
Lamp
• Unscrew the two screws to release the metal sur-
round.
• Remove the lamp from the holder by pulling the lamp
downwards.
• Replace the lamp with a new one of the same type, mak-
ing sure that you insert the two pins properly into the
housings on the lamp holder.
• Replace the Support, fixing it in place with the two screws
removed as above.
Replacement filters and light bulbs can be ob-
tained from your local Service Force Centre.