Filter
Top Products
0907 47
11
Notice
Date
Page
01201138
INSTRUCTION
HANDBOOK
11. Machine
operation
This screen shows the stored
tare parameter ; unit : hec-
tograms (1 hectogram = 100
grams)
Read tare value (for machines with weighing equipment installed only)
Read tare value
This function lets you check the value currently stored
as the tare parameter.
Press SELECT.
Press
four times to high-
light "READ TARE VALUE".
Press SELECT.
SCALE ADJUSTMENTS
SELECT
READ TARE VALUE
10 HG
SELECT
SELECT
RESET SCALE TO ZERO
RESET TARE TO ZERO
TARE SCALE
SET TARE TO A CERTAIN VALUE
READ TARE VALUE
CALIBRATE THE SCALE
ZERO CALIBRATION
READ VERSION NUMBER
EXIT
SERVICE PROGRAM
MAKE A CHOICE :
RESET SCALE TO ZERO
RESET TARE TO ZERO
TARE SCALE
SET TARE TO A CERTAIN VALUE
READ TARE VALUE
CALIBRATE THE SCALE
SELECT