Filter
Top Products
D1613
0408 12
9
D1591
Notice
Date
Page
01201138
INSTRUCTION
HANDBOOK
9. Installation
Drain's evacuation sleeve
Connection durit
Connection nozzle
Waste water collector
Drain connection
The machine's exhaust sleeve outside diameter is of 75 mm (3"). It is located underneath the
machine.
The waste water collector diameter 150 mm (6") (manufactured by customer) should have a 3
cm/m (3 %) slope and resist to a temperature of 90 °C (194 °F). It should be connected to the
waste water general network in accordance with local codes and regulations.
Adapt and connect the machine's exhaust sleeve to the waste waters' collector (rubber bend
and connection nozzle are supplied in the machine with collars).
Drawing of drain connection to waste waters' collector
Connect the durit to the connect nozzle.
Seal and fi x the nozzle using 2 screws.
Them connect the durit to the drain's evacuation sleeve.
Beside drain kit
The reference of the existing beside drain con-
nection kit is (technical data 31105161) :
- 55013696 + 75015189 for the WSB4 250H
and WSB4 350H machines
- 55013697 + 75015189 for the WSB4 500H
and WSB4 650H machines