Filter
Top Products
0107
75
11
Notice
Date
Page
01201138
INSTRUCTION
HANDBOOK
11. Machine
operation
Information in display :
Function no allowed.
Probable cause :
A function has been selected in the program which cannot be carried out.
Fault-fi nding procedure :
• Check that the function in question is switched on under "Settings".
• Check that the cables for CPU communication, power supply and load cells are connected.
• Check that these cables are all in good condition.
• If any cable is faulty, replace it.
Information in display service program :
Weighing equipment not connected.
Probable cause :
CPU board not communicating with scale unit.
Fault-fi nding procedure :
• Check that the connectors for CPU communication, power supply and load cells are con-
nected on the scale unit.
• Check that their cables are all in good condition.
• If any cable is faulty, replace it.