Filter
Top Products
1
2
3
4
0107 1
5
Notice
Date
Page
01201138
INSTRUCTION
HANDBOOK
5. Locking and
tagging procedure
Locking and tagging procedure
A red insert at the beginning of this instruction handbook schematically shows the locking and
tagging procedure described below. If you wish, you can detach this insert and display it close
to the machine to remind maintenance personnel of the safety instructions.
Put the main switch
to Off and lock the
handle with a padlock
in one of the three
holes provided for
this purpose.
Always respect items
2, 3 and 4 carefully
before doing any re-
pair or maintenance
work on the ma-
chine.
Open the fi xed
protectors (casings,
doors) with the key
provided or a special
tool.
Close and carefully
lock the fi xed
protectors.
Unlock the stop
valves and the
main switch.
Do the maintenance.
Close the stop valves
for the other supplies
(steam, gas, thermal
fl uid, compressed air)
to stop and lock their
handle with a pad-
lock.