Filter
Top Products
Adjusting the refrigerator shelves
Adjust the shelves to match the
way you usa
your refrigerator. Glass shelves are strong
enough to hold bottles, milk,
and
other
heavy food items.
To remove the shelves:
1.
Remove items from the shelf.
2. Tilt shelf up at front.
3.
Lll shelf up at back.
4. Pull shelf straight out.
To replace the shelves:
1.
Guide the rear shelf hooks into the slots
in the sheff supports on the back liner
wall.
2. Tilt front of shelf up until hooks drop into
slots.
3. Lower front of shelf to
a
level position.
Removing the snack bin
To remove the snack bin:
1.
Slide snack bin straight out to the stop
with an even, constant motion.
2. Lii the front.
3. Slide bin out the rest of the way.
4.
Replace in reverse order.
Removing the crisper and crisper cover
To remove the crisper:
1.
Slide the crisper straight out to the stop.
2. Lii the front slightly.
3.
Siiie out the rest of the way.
4. Replace in reverse order.
,~cNA
Pull out to the
??a
stop, lift the front
a/
and pull ageln.
To remove the cover:
1.
Hold cover firmly with both hands and lift
front of cover off supports.
2. Lii cover out by pulling up and out.
To replace the cover:
1.
Ffi back of cover into notch supports on
walls of refrigerator.
2. Lower front into place.
10
Lll the cover
front, then
the beck