Before Using Your
Refrigerator
I
In This Section
Ml@
PagO
Cleaning lt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5
lnstalllng lt properly
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6
I
I
Plugglng lt In . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5
Levellng It . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6
I
It is important to prepare your refrigerator for use. This section tells you how to clean it,
connect it to a power source, install it and level it.
Cleaning it
Removing packaging materials
Remove tape and any inside labels (except
the model and serial number label) before
using the refrigerator.
To rwnovo any remaining glue:
l
Rub briskly with thumb to make a ball, then
remove.
OR
l
Soak area with liquid handdishwashing
detergent before removing glue as
described above. Do not use sharp
instruments, rubbing aloohol, flammable
fluids or abrasive cleaners. These can
damage the rnateriil. See “Important
Safety Instructions” on page 3.
NOTE: Do not remove any permanent
instruction labels inside your refrigerator. Do
not remove the Tech Sheet fastened under
the refrigerator at the front.
Cleaning it before use
After removing all packaging materials,
clean your refrigerator before using it, if
necessary. See cleaning instructions on
pages 20-21.
Plugging it in
Recommended Grounding Method
A115Volt,60Hz.,AConlv15or20ampere
fused
and
property grour&d electrical ’
supply is required. lt is recommended that a
separate circuit serving only this appliance
be provided. Use a receptacle which cannot
be turned off with a switch or pull chain. Do
not use an extension cord.
See Electrical Requirements and Ground-
ing Instructions Sheet in your Liierature
Package.
&prong grounding
type wall receptacle
Refrigerator
power cord
grounding
PlW