3. Give the refrigerator time to cool down
NOTE: The Automatic Exterior Moisture
completely before adding food. Thii may
control continuously guards against moisture
take several hours.
build-up on the outside of your refrigerator
The settings indiited above should be
cabinet. This control does not have to be set
correct for normal, household refrigerator
or adjusted.
usage. The controls are set correctly
when milk or juice is as cold as you like
and when ice cream is firm. lf you need to
adjust these settings, see “Changing the
control settings” below.
Changing the control settings
If you need to adjust temperatures in
refrigerator or freezer, use the settings listed
in the chart below as a guide. If you have
questions, call our Consumer Assistance
Center number, 1-300-253-l 301.
l
Adjust the Refrigerator Control first.
l
Wait at least
24
hours between adjustments.
l
Then adjust the Freezer Control if needed.
RECOMMENDED
CONDITION:
REASON:
CONTROL SETTINGS:
Refrigerator
section
too warm
Freezer
section
too warm
Refrigerator
sectlon
too cold
l
Door opened often
l
Large amount of fcod added
l
Room temperature too warm
l
Door opened often
l
Large amount of food added
l
Very cold mm temperature
(can’t cycle often enough)
l
Ccmtrois not set correctly
for your conditions
Refrigerator 4
Freezer
A
Refrigerator 3
Freezer
C
Refrigerator 2
Freezer B
Ice not
made fast
enough
Both
sections
too warm
l
Heavy ice usage
l
Very cob room temperature
(can’t cycle often enough)
l
Door opened often
l
Large amount of food added
l
Very warm or very cob room
temperatures
Refrigerator 3
Freezer C
Refrigerator 4
Freezer B