Filter
Top Products
Cooktop & Installation Manual
Model COGB ENGLISH
5
Product Dimensions and Cutout Requirements
Important Preparation Suggestions
1. Chamfer all exposed edges of decorative laminate
to prevent damage from chipping.
2. Radius corners of cutout and file to Insure
smooth edges and prevent corner cracking.
Recommend 1/4“or 3/8“diameter drill In each
corner.
3. Rough edges, inside corners which have not been
rounded and forced fits can contribute to cracking
of the countertop laminate.
This cooktop has been designed with wide
tolerances of cut-out to cover possible
replacement with other brands. We recommend to
that you consider the minimum dimension of cut-
out size In the case of new Installation.
Some cut out sizes for possible replacements:
• 28 1/2"
(72.4 cm) X 19 15/16" (50.7 cm)
• 28 1/2"
(72.4 cm) X 19 5/8" (49.8 cm)
• 29"
(73.7 cm) X 19" (48.3 cm)
001
(76.2 cm)
30"
(8 cm
)
3-1/8"
(53.3 cm)
21"
Figure 1. Product dimensions
LENGTH OF CUT
MIN: 28 1/2" (72.4 cm)
MAX: 29" (73.6 cm)
WIDTH
O
F
C
U
T
MIN: 19" (48.3 cm)
MAX: 19-5/8" (49.8 cm)
1-1/2" (3.8 cm)
MIN CLEARANCE
FROM EDGE OF CUTOUT
AND FRONT EDGE OF
COUNTERTOP
2-1/2" (6.35 cm)
SEE NOTE*
002
Figure 2. Coutout dimensions