7
Clocks and timers
Electronic clock with minute timer model (C)
Setting the electronic clock
To set the clock, press and hold the – + buttons together
briefly (0.00 will stop flashing). You have six seconds to
start setting the clock. Press the – or + button until the
correct time is displayed. If you make a mistake, press the
– + buttons together and correct the time.
To adjust the time for daylight savings you can reset the
hours only. Press and hold the – + buttons together until
the hour digits begin flashing, release the – + buttons and
re-press either the – or + button until the correct time is
displayed.
Setting the minute timer
You can use the timer at any time, even when the oven is not in use. The timer does not turn the
oven off and has a maximum setting of 10 hours.
To set the timer, press the – or + button briefly, then the – or + button to set the time you want.
The
symbol and time set are displayed. The minute timer displays the countdown in minutes
and seconds, or hours and minutes.
To check the time of day during the running of the minute timer, briefly press the – + buttons
together.
To cancel the timer, reset the time to 0.00 by pressing the – button.
When the time is up, the timer will beep. Press the – or + button to turn the timer off.
Adjusting the volume of the timer
You can choose between three levels of volume for the timer beeps.
To adjust the volume:
1
Check the clock is set and the timer is not running.
2
Press and hold the – button. The timer will beep.
3
Release the – button and re-press to hear the next level of volume. The last level selected is
stored.
Note: if the power to the oven is cut, then the ‘beep’ volume will reset to the loudest level.
Fig.4 Electronic clock with
minute timer