Filter
Top Products
10
Installation instructions
Fastening the cooktop to the bench
1
Turn the cooktop upside down and place it on a soft surface.
2
Spread the seal around the edges, with the adhesive side facing down.
3
Mount the supplied front and rear clamps (R) and screws (S) onto the cooktop, as shown
(without tightening the screws).
4
Place the cooktop into the cutout, then tighten the screws to clamp the cooktop securely to the
bench.
5
Using a sharp cutter or trimmer knife, trim the excess sealing material around the edge of the
cooktop. Take care not to damage the benchtop.
Note: if your bench is thicker than 40 mm, recess the underside to between 20 and 40 mm.
Fig. 3 Preparing the cooktop before installation
Fig. 4 Fastening the cooktop to the bench
min
S
A
R
40 mm
20 mm
30 mm
R
R
R
R
S
Seal
S
S
S
Adhesive side
EN