Filter
Top Products
11
Installation instructions
Gas installation requirements
Important !
Before installation, make sure that the local distribution conditions (gas type and pressure) and
the adjustment of this appliance are compatible. The appliance adjustment conditions are given
on the plate or the label.
This appliance must be installed and serviced only by a suitably qualified, registered installer
with technical knowledge of both gas installation and electricity. The installation or service must
comply with the current editions of the applicable standards, regulations, and codes of practice
governing gas and electrical installations.
Failure to install the appliance correctly could void any manufacturer’s warranty.
This appliance is supplied for use on NATURAL GAS or LPG or TOWN GAS (check the gas
regulation label attached on the appliance).
Appliances supplied for use with NATURAL GAS: these are adjusted for this gas only and cannot
be used with any other gas (LPG or TOWN GAS) without modification. The appliances may be
converted to LPG or TOWN GAS using the conversion kit.*
Appliances supplied for use on LPG: they are adjusted for this gas only and cannot be used on any
other gas (NATURAL GAS or TOWN GAS) without modification. The appliances may be converted to
NATURAL GAS or TOWN GAS using the conversion kit.*
Appliances supplied for use with TOWN GAS: these are adjusted for this gas only and cannot be
used with any other gas (NATURAL GAS or LPG) without modification. The appliances may be
converted to NATURAL GAS or LPG using the conversion kit.*
*If the NATURAL GAS/LPG/TOWN GAS conversion kit is not supplied with the appliance, this kit can
be purchased by contacting Fisher & Paykel. Please see your ‘Warranty & Service’ booklet for further
details.
EN