Filter
Top Products
17
heavy normal normal
eco
rinse
delicatefast
To select and start a wash programme
1
Make sure that the dishwasher is powered on .
2
Press until the indicator of the desired programme lights up.
3
Press to start the programme.
After 5 seconds, the selected programme indicator will start flashing, the dishwasher will
beep once and the wash will start automatically.
The display will show the approximate time remaining.
Note: the dishwasher will remember the last programme used.
To pause and restart a wash programme
1
Press to pause the programme.
2
Open the door very slowly.
Important!
There is a risk of being sprayed with hot water. Do not fully open the door until the spray arms have stopped
rotating.
3
Load, remove, or rearrange any dishes if needed.
4
Check that there is no excessive steam, then close the door.
Important!
If the programme is paused when the dishwasher has already heated the water, leave the door ajar for
several minutes before closing it again; if you don’t, the expanding steam inside could force the door open.
5
Press to restart the programme.
Controls and starting a wash - CE models
Programme
selector
Start/PauseProgramme
indicators
CE MODELS