Filter
Top Products
41
Troubleshooting
Problem Possible cause What to do
Dishes, cutlery have
not dried.
Rinse aid dosage too low. Increase rinse aid dosage. See ‘Using rinse
aid’.
Items removed too soon. After the end of the wash programme, leave
the door ajar and wait for several minutes to
help drying.
Rinse aid dispenser empty.
(The rinse aid indicators
are lit.)
Add rinse aid. See section ‘Using rinse aid’ for
instructions.
Glasses have dull
appearance.
Rinse aid dosage too low. Increase rinse aid dosage. See ‘Using rinse
aid’.
Tea stains or traces
of lipstick have not
been completely
removed.
Not enough detergent. See section ‘Wash programmes and
detergent quantities’ for recommended
quantities. You may need to adjust these to
suit your particular load.
Wash temperature too low. Select a wash programme with a higher
temperature (see section ‘Wash programme
data’ for information).
Traces of rust on
cutlery.
Cutlery is not sufficiently
rustproof.
Wash by hand.
Glasses clouded
and discoloured;
milky coating
Hard water situation. Increase detergent quantities.
Glasses are not dishwasher
proof.
Wash by hand.
Water marks left on
glasses and cutlery.
Rinse aid level or dosage
setting is too low.
Ensure there is rinse aid in dispenser. If
necessary, increase the rinse aid setting or
try using a wash programme with a higher
temperature. See sections ‘Using rinse aid’
and ‘Wash programme data’.
Fan noise
coming from the
dishwasher after a
wash
(CC models only).
This is normal. A drying
fan will continue to run for
about an hour after a wash
or until the door is opened.
No action required. If you would like the
drying fan to stop, open the dishwasher
door.