Filter
Top Products
26
Using your induction cooktop
Control dials
Each cooking zone is activated by a separate control dial positioned on the control panel. The
functions are arranged on the actual dial itself.
If a cooking zone is not turned off (‘0’ position) the electronic system automatically switches it off
after a pre-set time ranging from 90 minutes to 6 hours, depending on the power setting.
Power level
Turn the dial clockwise to set the desired power level between 1 (minimum) and 9 (maximum).
The power level can be modified at any time by turning the dial clockwise or anti-clockwise to a
different setting.
The cooking zone display shows the selected level.
Hot Surface Indicator
When the temperature of a cooking zone is still hot, the relevant Hot Surface indicator lights
up on the display to alert you of the hot surface. Avoid touching the cooktop surface over the
cooking area. Please pay special attention to children. When the
is lit on the display, it is
still possible to start cooking again; just turn the control dial to the required power level. The
indicator will disappear when the surface has cooled down to a safe temperature.
Childlock
When not using the induction cooktop, set the Childlock to prevent children from accidentally
switching on the cooking zones.
Ensure all cooking zones are switched Off (‘0’ position), then turn the control dials of the left
cooking zones simultaneously to the left (‘A’ setting) and hold the dials in this position until
lights up on the cooking zones display; then release the dials.
To deactivate the childlock repeat the same procedure until
lights up on the cooking zones
display; then release the dials.
1
2
1
2
Fig 24 Control dial -
rear left & front right zone
Fig 25 Control dial -
front left & rear right zone