Filter
Top Products
12
Installation instructions
4. Dismantling the top and bottom attachment brackets
4a
Open the refrigerator door and remove the top attachment bracket cover by drawing it upwards.
Do the same for the freezer.
4b
Move the rulers vertically so the top of the rulers latch onto the cabinet above.
Top of kitchen cabinet
Ruler
Fig.8 Latching the rulers onto the cabinet
4c
Loosen the two hexagonal screws on the top attachment bracket and then remove the top
attachment bracket and rulers together. Do the same for the freezer door.
Both attachment brackets are required for refrigerator installation. Go to page 13 if you are
now installing the refrigerator. If you do not intend to install the refrigerator at this time, store
the brackets for later use.
Top attachment bracket
(assembled status)
Refrigerator door
Top attachment bracket
(disassembled status)
Fig.9 Dismantling the top attachment bracket