Filter
Top Products
USING THE ELECTRONIC PROGRAMMER (pic. 8)
F
U
N
C
T
I
O
N
Timer
Minus setting
Temperature
Setting the clock
Switch the oven on; 00.00 will appear in blinking mode on the display.
the display. To set the clock, simultaneously press the duration
and end of cooking keys together. Using the +/- keys on the right,
select the time of day required. With the key “+” the time increases,
with the key “-” the time decreases at a speed directly proportional to
the duration of the pressure exerted on the key. When the time is stored,
the point between the hours and the minutes will stop blinking
approximately 7 seconds after the last operation. To update the
time, repeat the operation.
Manual operation
Press duration and end time button together. If an automatic
program is on the “AUTO” symbol (B) will be erased, the pot
symbol (C) is illuminated. Any programme which has been previously
set is cancelled.
B
C
D
A
Minute minder
Duration and manual mode
Automatic programme
Plus setting
Cooking end time
Cooking duration time
Pic. 8
20