Franklin Industries, L.L.C. FIM44 Ice Maker User Manual


 
22
5. Repeat steps 3 and 4 (without Ice Maker Cleaning Solution) three times to rinse the ice
making system thoroughly.
· NOTE: Ice Maker Cleaner Solution in the water bin during the rinse is not
needed.
6. Prepare a sanitizing solution made of 1 ounce of household bleach and 2 gallons of hot
water (95º to 115ºF). Wipe the entire bin inside and outside, covering the entire surface
of the walls.
7. Fill a spray bottle with the sanitizing solution and spray all corners and edges, making
sure to cover all surfaces with the solution.
8. Allow the solution to be in contact for at least 3 minutes, then dry.
9. Repeat step 5 to rinse the ice making system one more time.
10. Press the ON/OFF button again. The machine will return to the regular ice making
mode. Discard the first batch of ice.
Control panel:
The ice machine cleaner contains acids.
DO NOT use or mix with any other solvent-based cleaner products.
Use rubber gloves to protect hands. Carefully read the material
safety instructions on the container of the ice machine cleaner.
Discard the first batch of ice produced after cleaning.