Franklin Industries, L.L.C. FIM44 Ice Maker User Manual


 
23
Description of LEDs and buttons:
1. Bin Full (Red) LED: Bin full indicator light
When this is lit, the ice storage bin is full of ice or there is some thing blocking the
bin-full probe. The unit will stop working. When ice cubes are removed from the ice
storage bin, freeing the bin-full probe, the red LED will remain flashing for 3 minutes,
then the unit will restart and return to the ice making mode.
2. Ice Making(Green) LED: Ice making indicator light
When this is lit, the unit is working in the ice making mode controlled by a
temperature probe on the evaporator. When the green LED flashes, the unit is working
in the ice making mode controlled by a fixed timer.
3. Ice Harvest (Yellow) LED: Ice harvest indicator light
When this is lit, the unit is working in the ice harvest mode controlled by the ice-full
probe.
When both the green and yellow LEDs are lit, the unit is in the cold preservation
mode.
4. Mode button: Mainly for service. When this is pressed, the ice making mode changes
to ice harvest mode or vice versa. The mode can be judged from the status of the green
and yellow LEDs.
MAJOR FUNCTIONS
1. The operating procedure is completely automatic.
2. When the ice storage bin is full of ice cubesthe machine stops making ice and
proceeds to the cold preservation stage automatically. It starts making ice again after
ice cubes are removed.
3. When the drainage tray on top of the compressor is full of water, the machine stops
working and alarms at regular intervals. Only when you drain off water by unscrewing
the lower drainage nut does the machine resume working.
4. The different colors of the LED display indicate various work modes.
5. The fan motor responds to the ambient temperature. If it is cold, the motor will stop
working to keep the cooling system in good working condition.
6. A sensitive probe and accurate timer enhance the performance of the ice maker.
7. A compressor protection system is built in.