Filter
Top Products
25
Check if the water supply pressure is below
15 psig.
Check water supply or filter may be
restricted.
Cubes are partially
formed or are white
on the bottom.
Not enough water in the
water trough.
Check for a water leak at the water trough.
The feet are not leveled and
locked.
Level and lock the feet. See Leveling the Ice
Maker.
Noise during
operation
Certain sounds are normal. See Normal Sounds.
The electricity is off. Reconnect the power supply line.
The room temperature is out
of the stated range.
Cut off the electricity and leave the ice
maker disconnected until the temperature
returns to within the stated range.
The ice storage bin is full of
ice.
Remove some ice cubes; make sure the
ice-full probe is free of ice.
The ice maker stops
suddenly while
making ice.
Drainage tray is full of water Drain off water by unscrewing the lower
drain nut.
The body of the ice
maker is electrified
The ground line isn't in the
socket.
Use a socket meeting the grounding
requirements.
Scaling occurs
frequently inside
the machine.
The hardness level of the
water is too high.
Install a water-softening device in front of
the water inlet.