14
? Running water may make a splashing sound.
? You may hear air being forced over the condenser by the condenser fan.
? During the Harvest cycle, you may hear the sound of ice cubes falling into the ice
storage bin.
Preparing the Ice Cube Machine for Long Storage
If the ice cube machine will not be used for a long time, or it is to be moved to another
place, it will be necessary to drain the system of water.
1. Shut off the water supply at the main water source.
2. Disconnect the water supply line from the water inlet.
3. Shut off the power supply at the main electrical power source.
4. Screw off the water tank screw nut and drain out water completely, then tighten the
nut after finishing. Dry the tank.
5. Take out the ice storage bin to remove ice. (See pp. 16-17.) Dry and replace the bin.
6. Leave the door open to allow for circulation and to prevent mold and mildew.
7. Leave the water supply line and power cord disconnected until ready to reuse.
IMPORTANT:
• Do not touch the power plug when your hands are wet.
• Never unplug the unit by pulling on the cord.
Cleaning and Maintenance
Periodic cleaning and proper maintenance will ensure efficiency, top performance, and
long life. The maintenance intervals listed are based on normal conditions. You may
want to shorten the intervals if you have pets or there are other special considerations.
What shouldn’t be done
Never keep anything in the ice storage bin other than ice: objects like wine and beer
bottles are not only unsanitary, but the labels may slip off and plug up the drain.
What should be kept clean
There are 4 things to keep clean:
1. The exterior
2. The interior
3. Water distribution tube
4. The ice-making system