Filter
Top Products
16
SETTING OVEN CONTROLS
Setting the clock
When the appliance is powered up for the first time or when
the electric supply to the appliance has been interrupted, the
display will flash "12:00" (Fig. 1).
To set the clock for 1:30:
Step Press
1. Press set clock.
2. Enter 1 3 0.
3. Press start to accept.
Fig. 1
NOTES
• Be sure to set the clock with the correct time of day
before using the oven.
• The clock cannot be adjusted when the oven is active
with any cooking function or during self-clean.
Changing between 6-Hour Energy Saving
or continuous bake mode settings
The oven control is factory preset with to the 6 Hour
Energy Saving mode that will automatically turn the oven
off after 6 hours. The control may also be programmed to
override this feature to continuously bake.
To switch between 6-Hour Energy Saving or
continous bake modes:
Step Press
1. Press and hold timer on • off
for 6 seconds.
2. Press self-clean
to toggle between "6 Hr OFF"
(Fig. 2) or "StAY On" (Fig. 3)
and release keypad.
3. Press start to accept.
Fig. 2 Fig. 3
Setting 12 or 24 hour display mode
The oven control is factory preset to show the time of day
with a 12 hour clock. This setting may be changed to
provide the time of day with a 24 hour clock.
To set 12 or 24 hour display mode:
Step Press
1. Press and hold set clock
for 6 seconds.
2. Press self-clean
to toggle between "12 Hr dAY" or
"24 Hr dAY" display modes
(See Figs. 4 & 5) and release
keypad when the mode you prefer
is displayed.
3. Press start to accept.
Fig. 4
Fig. 5
Changing between the 6-Hour Energy Saving or
continuous bake mode will not change how the cooktop
controls operate.
NOTE