Filter
Top Products
33
After pressing start, the door lock motor will activate.
"door Loc" will appear in the display (Fig. 1). DO NOT
attempt to open the oven door when the "door Loc"
message is displayed (allow about 15 seconds for the
oven door to completely lock). DO NOT force the oven
door open. This may damage the automatic door
locking system.
Setting a self-clean cycle
When the self-clean cycle is done:
1. The time of day and "Hot" will show in the display
(See Fig.3).
2. Once the oven has cooled (about 1 hour) and "Hot" is
no longer displayed the "door OPn" message will
appear (Fig. 4). When this message turns off the
door is finished unlocking. Use caution and avoid
possible burns when opening the door after the self-
cleaning cycle. The oven may still be VERY HOT.
Step Press
1. The oven should be empty and all
oven racks removed. Remove
all items from the cooktop. Be sure
the oven door is completely closed.
2. Press self clean once for a 3-hour
clean time, press self clean twice for
4-hour clean and press 3 times
for a 2-hour self-clean cycle time.
3. Press start to activate.
Example: To start an immediate self-clean cycle:
IMPORTANT
NOTES
Fig. 1
Fig. 2
Fig. 3
Fig. 4
• Whenever the self-clean feature is active you may
check the amount of clean time remaining by pressing
the keypad once. The oven door will remain
locked until the range has cooled sufficiently. You will
need to allow about 1 additional hour to the time
displayed before you can open the oven door.
• When the oven is cool, wipe away any residue or
powdered ash from the oven interior using a damp
cloth or paper towel.
IMPORTANT
• It is normal for odors to occur during self-clean,
especially during the first self-clean cycle. It is
recommend to ventilate the kitchen. Open any
windows and if available turn on an exhaust fan or
overhead range hood during the self-clean cycle.
• Be aware that during self-clean temperatures inside
the oven will become hot enough to melt or destroy
some types of materials, including cookware made
with materials having a low melting point and
aluminum foil.
Read before starting self-clean (cont’d)
Once the door has locked, "CLn"
will appear in the display indicating
the oven has started heating for the
self-clean cycle (Fig. 2).
CAUTION
To avoid possible burns use caution when opening the
oven door when the self-clean cycle is finished. The
oven may still be VERY HOT. Stand to the side of
the oven when opening the door to allow hot air or
steam to escape.
Press cancel at any time to stop self-clean.
SELF-CLEANING