Filter
Top Products
- 6 -
PREPARE THE HOOD
(NON-DUCTED HOODS ONLY)
Purchase a Non-ducted recirculation KIT from your dealer (Model
DFKTPC50EC).
1. Insert the non-ducted recirculation plenum through the support frame openings.
Fig. 8.
2. Through the support frame openings fit the duct connector to the plenum locking
it with a turning movement. Fig. 9.
3. Fix a 5” duct to the duct connector of the non-ducted recirculation plenum. Fig.9.
4. Mount the 6”/5” adapter above hood. Fig. 10.
(DUCTED HOODS ONLY)
Mount the discharge collar above the hood. Fig. 11.
CONNECT DECORATIVE FLUE
1. Secure the upper flue to the upper support frame with the mounting screws
(2.9x9.5mm).
2. Insert the lower flue moving it completely towards the top and fix it temporarily
with retaining screw (3.9x9.5mm).
LOWER
FLUE
UPPER
FLUE
MOUNTING SCREWS
(2.9x9.5mm)
RETAINING
SCREW
(3.9x9.5mm)
FIG. 8
NON-DUCTED
RECIRCULATION
PLENUM
FIG. 9
DUCT
CONNECTOR
5” DUCT
FIG.10
6”/5”
ADAPTER
FIG.11
FIG.12
DISCHARGE
COLLAR