YSCFHC18G HIGH EFFICIENCY COOL ZONE SERIES GAS FRYERS
CHAPTER 7: TROUBLESHOOTING
7-2
7.2 Fryer Troubleshooting
For FAST-equipped fryers, consult the FAST controller manual. These steps apply to the KFC-1
SMS computer only.
7.2.1
Computer fails to turn ON
when ON/OFF button is
pressed.
1. Check wall circuit breakers. Reset, if
needed.
2. Check fryer connection to external
power source.
3. Disconnect fryer from power supply.
4. A power surge or outage may have
temporarily locked out computer.
If the fryer still fails to turn ON when the
ON/OFF button is pressed, contact an
authorized service agent.
7.2.2
Computer is ON, but the
gas valves fail to energize.
1. Ensure float-switch is not stuck in
"down" position. Contact an authorized
service technician for service if float-
switch is defective.
2. If the KFC-1 SMS computer displays
HELP, reset high-limit thermostat
(located in the fryer cabinet under the
control panel). Contact an authorized
service technician for service if high-
limit will not reset.
Ensure at least one product button is lit on
the computer. If not, press product buttons
until one button is lit.
7.2.3
Computer is ON but fryer
fails to heat.
Ensure setpoint assigned to product is
accurate.