Filter
Top Products
2-8
Conversion of this appliance from one type of gas to another should only be performed by
qualified, licensed, and authorized installation or service personnel, as defined in Section
1.6 of this manual.
BIGLA30 LOV™ gas fryers manufactured for Non-CE countries use different burners for each type gas. The
burners in fryers built for propane gas have a special gray-colored coating on the burner tiles to enable them to
withstand the higher caloric value of the propane gas. Burners designed for use in propane units may be used in
natural gas applications, but not vice versa.
Non-CE Gas Conversion Kits
Natural Gas to Propane (LP) Gas Propane (LP) Gas to Natural Gas
Full Vat before 09/10: PN 826-2527 Full Vat before 09/10: PN 826-2528
Dual Vat before 09/10: PN 826-2529 Dual Vat before 09/10: PN 826-2530
Full Vat after 09/10: PN 826-2965 Full Vat after 09/10: PN 826-2967
Dual Vat after 09/10: PN 826-2966 Dual Vat after 09/10: PN 826-2968
Non-CE Gas Conversion Kits for Australia
Natural Gas to Propane (LP) Gas Propane (LP) Gas to Natural Gas
Full Vat before 09/10: PN 826-2745 Full Vat before 09/10: PN 826-2747
Dual Vat before 09/10: PN 826-2746 Dual Vat before 09/10: PN 826-2748
Full Vat after 09/10: PN 826-2969 Full Vat after 09/10: PN 826-2971
Dual Vat after 09/10: PN 826-2970 Dual Vat after 09/10: PN 826-2972
Units manufactured for export to CE countries are equipped with “universal” burners that may be used with either
Natural (G20, G25) gas or Butane (G30) and Propane (G31) gasses.
CE Gas Conversion Kits for Units with Gas Valve 810-1715
G20 or G25 (Natural) to G30 or G31 Gas: G30 or G31 to G20 or G25 (Natural) Gas:
before 09/10 PN 826-2973 before 09/10 PN 826-2974
after 09/10 PN 826-2975 after 09/10 PN 826-2976
CE GAS CONVERSION INSTRUCTIONS
1. Between G20- and G25-type Natural Gas, adjust the gas pressure at the regulator. (Refer to the CE Standard
Burner Manifold Gas Pressure Chart.) Do not change the orifice.
2. Between a 2
nd
family (G20 or G25) and a 3
rd
family gas (G30 Butane or G31 Propane):
a. Change the orifices.
b. Adjust the manifold pressure.
3. Remove the old rating plate and return to Frymaster. Affix the new rating plate included with the conversion
kit in place of the old rating plate stating the gas has been converted.
4. If the destination language changes, replace the rating plate. Call your local service agency or KES for a label
kit. The language of reference will be on the corner of the label.