Filter
Top Products
4-30
3. Press the t and u buttons to scroll between:
a. Prod comp See pg. 4-30
b. e-log See pg. 4-31
c. password SETUP See pg. 4-31
d. alert tone See pg. 4-32
e. filter After See pg. 4-33
f. filter time See pg. 4-34
NOTE:
Use the 3and 4buttons to move between positions within the selections.
When entering numbers, press the corresponding button using the 0-9 keys.
Press the t and ubuttons to accept input and move to the next or previous menu item.
4. With the desired selection displayed press the (1 yes) button.
4.13.1 PRODUCT COMP MODE
The product comp mode allows the product compensation (sensitivity) to be changed. Some menu
items may need an adjustment, depending on their cooking characteristics. Use caution when
changing the product compensation, as it could have an adverse affect on the products cooking
cycles. The default setting for product compensation is set to four.
1. Perform steps 1-3 on pages 4-29 through 4-30.
Computer displays Prod Comp.
2. With prod comp displayed press the (1 yes) button.
Computer displays PRODUCT SELECTION changing to Select product.
3. Use the t and u to scroll through the product list.
The computer displays the product selected.
4. With a product selected, press the (1 yes) button to select a product.
The computer displays modify? alternating with yes no.
5. Press the (1 yes) button to continue or the (2 no) button to return to
LEVEL 2 PROGRAM.
Computer displays LOAD COMP on left side with 4 or another value on the right. This is the
sensitivity setting recommended for this product.
NOTE: It is highly recommended to NOT adjust this setting, as it could have an
adverse effect on the product.