Filter
Top Products
CM4-S Cooking Computer — Programming with Filtration
3-4
52. Press .
53. Segment appears in left display; Prod 1 in right
54. Press product button 4 .
55. Cooktime appears in left display; 0 appears in the
right.
56. Subtract desired time for second cook segment from
remaining cooktime. (See example at right.) Enter that
number at the cooktime prompt.
57. Press to lock in cooktime .
58. Set-Temp appears in left display and 0 or a
previously programmed temperature appears in the right.
59. Use product keys to enter the cooking temperature for the final
temperature change.
60. Press . Sens appears in the left display; 0 or a previously
set sensitivity setting appears in the right.
61. Use product keys to enter sensitivity.
62. Press .
63. Segment appears in left display; Prod 1 in right. All
programmed buttons are illuminated.
64. Nine minutes of the 13-minute cooktime have been programmed.
No additional programming is required. The computer will take the
oil to the last setpoint, which was established in step 58 and
countdown the remaining 4 minutes.
65. Press to leave programming for this product button.
66. Product appears in the left display. Right display is blank.
67. Press next product button to be programmed with segmented
cooking cycles. Follow steps outlined above to program.
68. To lock in programming and exit, press
.
7:00
-3:00
4:00
Remaining
cooktime
Cooktime
for 3rd
segment
Time entered into
CM4-S.