Filter
Top Products
CM4-S Cooking Computer —Programming for non-Filtering
4-5
Programming for non-Segmented Cooking
(Non-Filtering Mode)
1. Press , the ON/OFF button to turn computer off.
2. Display shows OFF.
3. Press hidden programming button in Frymaster logo. (See diagram).
4. CODE appears on left side; right side is blank.
5. Enter 1650 using numbered product keys. Use button 10
for 0.
6. Product shows in left display. All product buttons blink. Right
display is blank.
7. Press the product button you want to program. Heads appears
in left display; A number appears in the right. The LED in the chosen
button remains lit. All others go off.
8. Use the product buttons to enter the number of heads of chicken or an
equivalent to be assigned to this product button.
9. Press to lock in choice.
10. *Segment appears in left display, PROD and the number of the
button being programmed appears in the right. The LED in product
button 1 begins to flash.
11. Press product button 1 . The LED in product 1 continues to flash;
the LED in the button being programmed stays on continuously.
12. Cooktime appears in left display; 0 or a time programmed
previously appears in right display.
13. Use the product buttons to enter 0, which eliminates earlier
programming.
14. Press
.
15. Segment appears in left display, PROD and the number of the
button being programmed appears in the right. No button LEDs are
illuminated.
16. Press a product button .
17. Cooktime appears in left display; 0 appears in the right display.
18. Use product keys to enter the cooktime.
19. Press
to lock in cooktime.
61. Set-Temp appears in left display and 0 or a previously
programmed temperature appears in the right.
20. Use product keys to enter the cooking temperature for the product.
Programming
Hint
French fries and
other products do
not require
segmented
cooking cycles.
Simply exit the
programming
sequence at the
second Segment
display. The time
entered into the
first segment will
establish the
complete cooking
time.
* If you plan to use
the cooking alarms
or exit modes
features, please
skip to sections 5
and 6 for
instruction on their
programming.
If not,
programming can
continue in the
sequence at right.
** The temperature
display can be
toggled from
Fahrenheit to
Celsius in this
step. See
instructions on
Page 7-1.