Filter
Top Products
Toggle from Fahrenheit to Celsius
7-1
1. Press , the ON/OFF button to turn computer off.
2. Display shows OFF.
3. Press hidden programming button in Frymaster logo. (See diagram
page 2-2).
4. Display shows CODE on left side.
5. Enter 1650 using numbered product keys. Use button 10
for 0.
6. Product shows in left display. All product buttons blink. Right
display is blank.
7. Press a product button . Heads appears in left display; 0 in
the right. The LED in the chosen button remains lit. All others go
off.
8. Press to step to next choice.
9. Segment appears in left display, PROD 1 in right. The LED
in the 1 product button begins to flash.
10. Press product button 1 . The LED in product 1 continues to flash.
11. Cooktime appears in left display; 0 or a time programmed
previously appears in right display.
12. Press to step to next choice .
13. Set-Temp appears in left display; a temperature in Fahrenheit
or Celsius appears in the right display.
14. Press to toggle between choices.
15. With desired choice displayed, press .
16. Sens appears in left display; right is blank.
17. Press .
18. Segment appears in left display; Prod appears in right.
19. Press .
20. Display shows product on left; right is blank. All LEDs flash.
21. Press to turn computer off.
Programming
Hint
The temperature
display on the
CM4-S can be
changed from
Fahrenheit to
Celsius during the
regular
programming
process. An
abbreviated
programming
sequence is shown
at right to address
Fahrenheit-to-
Celsius adjustment
exclusively.