Filter
Top Products
CM4-S Cooking Computer — Alarm Programming
5-2
7.
To exit alarm programming, press hidden programming button
twice. Ex Cycle , which is described in section 6, will display on the
computer at the first push. On the second button push the computer
will revert to segment and product number.
8. Resume programming for segmented, non-segmented, filter or non-
filter mode as described in their sections.
9. Determine the point in the cooktime countdown the second alarm
should occur. For example, to set an alarm seven minutes into a 13-
minute cook cycle, set the alarm at 6:00, the time the computer will
display when seven minutes have elapsed in the cook cycle. (See
graphic above).
10. Use to toggle between A and M. With desired time and alarm-
canceling mode displayed, press to proceed to set Alarm 3.
11. Determine the point in the cooktime countdown the thirdt alarm
should occur. For example, to set an alarm 11 minutes into a 13-
minute cook cycle, set the alarm at 2:00, the time the computer will
display when 11 minutes have elapsed in the cook cycle. (See
graphic above).
12. Use to toggle between A and M.
13. To exit alarm programming, press hidden programming button
twice. Ex Cycle , which is described in section 6, will display
on the computer at the first push. On the second button push the
computer will revert to segment and product number.
14. Resume programming for segmented, non-segmented, filter or non-
filter mode as described in their sections.