Filter
Top Products
4
6. Adjusting Bun Compression
1. There are two pairs of compression adjustment knobs (one pair numbered 1-5, the other lettered A-
E), as shown in the accompanying illustration. Factory settings are circled.
UPPER COMPRESSION LABEL
Crown Compression
Adjustment (1-5)
Crown Compression
Adjustment (1-5)
Heel Compression
Adjustment (A-E)
2. Settings A and 1 cause the greatest bun compression (that is, the thinnest bun after toasting).
7. Changing Belts
1. Turn the unit off (press the ON/OFF button) then unplug it. If the unit has been in operation,
allow it to cool for about 1½ hours. TIP: Change belts in the morning, prior to turning the toaster
on.
2. Remove the bun feeder, and then open the cover.
3. Set the bun compression knobs to positions E and 5.
4. Press down on the top roller and move it to the retracted (down) position. (NOTE: Each side of the
roller must be locked down.)