Filter
Top Products
EB 270
EB 290
Proceed as follows:
– When unpacking the appliance, check it for
transport damage.
– Please remove the adhesive tapes that protect the
door during transport.
– A flexible cable should be used as the mains
lead. The cross-section must be selected
according to the rated current consumption and
the type of connection.
– Push the appliance into the item of furnishing. Use
the included wood screw to firmly bolt it to the
face timber surface of the conversion cabinet on
the handle and hinge side, directly underneath
the bottom panel.
– After installing, ensure that wires are protected
against contact.
– Finally test the oven for correct functioning.
– Thoroughly clean the appliance and accessories
before using them for the first time.
(see ”Cleaning and Care”)
5080001320ind01 en 6.00 SK 39
585
560
m
in.
5
50
550
580
536
42
590
85
590
10
Fig. 52
585
660
m
in.
5
50
650
580
536
42
690
85
590
10
Fig. 53