Filter
Top Products
Installation Instructions
18
BEFORE YOU BEGIN
The rollers have 2 purposes:
■ The rollers are used to level the refrigerator.
NOTE: The refrigerator must be completely level
for the icemaker to work.
■ Rollers allow you to move the refrigerator away from
the wall for cleaning.
■ Upon completion of leveling, adjust stability leg to
touch the floor.
To adjust the rollers:
Remove the base grille by pulling it out at the bottom.
Turn the two front roller
adjusting screws clockwise
to raise the refrigerator,
counterclockwise to lower it.
Use a 3/8″ socket wrench,
adjustable wrench or pliers.
CustomStyle™ models also
have rear adjustable rollers
so you can align the refrigerator with your kitchen
cabinets. Use a 5/16″ socket wrench to turn the
screws for the rear rollers—clockwise to raise it,
counterclockwise to lower it.
ROLLERS
Stability Leg
Front Roller
Adjusting Screw
Rear Roller
Adjusting Screw
DIMENSIONS AND SPECIFICATIONS
(for CustomStyle™ models)
70
1
/4″
(178.4 cm)
24
1
/2″
(62.2 cm)
36
1
/8″
(91.8 cm)
24
1
/2″ (62.2 cm)
Side Panels
Electrical
Water
3/4″ (19 mm) Airspace
(1/2″ [8 mm] Gap +
1/4″ [6 mm] Wall Plates)
25″ (63.5 cm)
Countertop
24″
(61 cm)
Cabinet