Filter
Top Products
How to Use the Minute/Second Timer
The Minute/Second Timer has
three timing functions:
. It operates as a minute timer.
● It can be set to delay cooking.
● It can be used as a hold setting
after defrosting.
The Minute/Second Timer operates
without microwave energy.
How to
~me
a 3-Minute
Phone Call
1. Touch MIN/SEC TIMER pad.
The display shows “: O“ and
“ENTER TIME” flashes.
2. Touch number pads 3,0 and O
for 3 minutes and no seconds.
Display shows
“3:00” and
“TIME:’
3. Touch START pad. Display
shows time counting down.
4. When time is up, oven signals,
flashes
“End;’ and display shows
time of day.
Using a Holding
~me
The Minute/Second Timer can also
be used to program a “holding time”
between microwave cooking functions.
The time can range from one second
to 99 minutes and 99 seconds. A
holding or standing time maybe
found in some of your own recipes
or in the Cooking Guide.
Programming Delayed
Cooking
To delay cooking up to 99 minutes
and 99 seconds, touch TIME COOK
I
& II pad and enter cook time.
Touch
MIN/SEC
TIMER pad and
enter number of minutes to delay
cooking. Touch START pad. Timer
will count down to zero and
cooking will begin.
How
to Defrost, Hold and
~me
Cook
Let’s say you want to defrost a frozen
casserole for 15 minutes, hold for
10 minutes and then Time Cook for
25 minutes. Here’s how to do it:
Step 1:
Take casserole from freezer
and place in oven.
Step
2: Touch TIME DEFROST pad.
The display shows “: O“ and
“POWER
3:’
“ENTER DEF
TIME” flashes.
Step 3: Touch number pads 1,5,0
and O for a defrosting time of 15
minutes.
“15:00”
appears on display.
(Defrosting is automatically set on
power level 3, but can be changed
by touching the POWER LEVEL
pad and the desired power level.)
D
MINISEC
(j,,,:
TIMER
‘j~~=:,:
,
,.
Step
4: Set standing or hold time
by touching
MIN/SEC TIMER pad.
The display shows “: O“ and
“ENTER TIME” flashes.
Step
5: Touch 1,0,0 and O to hold
for 10 minutes.
“10:00” appears on
display and “TIME” flashes.
Step
6: Touch TIME COOK I & II
pad. The display shows”: O“ and
“POWER
10?’
“ENTER COOK
TIME I“ flashes.
9
Step
7: Touch 2, 5,0 and O for a
cooking time of 25 minutes.
“COOK TIME” flashes and
“25:00” and “POWER 10” appear
on display.
Step
8: Touch the START pad.
“DEF TIME” and
“15:00~’
counting down, show on display.
As each function is automatically
performed, the oven display shows
the instructions entered and the
function.
Step
9: When time is up, the oven
signals and display flashes
“End?’
Questions and Answers
Q. What will happen if I
accidentally reverse my defrost,
hold and cook instructions?
A. The oven
will
automatically
rearrange your program. Defrosting
will
always
come first, then hold,
and then the cooking function.
Q.
Can I defrost and hold only?
A. Yes.
Sometimes you may only
want to defrost a food, hold it, and
cook it later. All you need to do is
program in defrost and amount of
time. Then program the hold time
and the amount of cooking time. Be
sure to put the thawed dish in the
refrigerator promptly.
NOTE: Let foods remain at room
temperature only as long as safe.
Times will vary.
Q.
I programmed my oven for
a specific defrosting time but it
defrosted
longer than necessary.
What happened?
A. When instructions conflict,
the oven carries out the last
instruction. You may have set the
oven to defrost for 4 minutes, hold
for 2 minutes, and then defrost for
6 minutes. In this case, the oven
would defrost for 6 minutes and
hold for 2 minutes.
1
I
~
i
1
■