Filter
Top Products
Control Panel
It’s a good idea to wipe the control panel after each Do not use abrasive cleansers, strong liquid
use. Clean with mild soap and water or vinegar and
cleaners, plastic scouring pads or oven cleansers
water, rinse with clean water and polish dry with a
on the control panel—they will damage the finish.
soft cloth.
A 50/50 solution of vinegar and hot water works well.
Glass Surfaces Metal Parts
To clean the
outside glass finish, use a glass cleaner.
Do not use steel wool, abrasives, ammonia or
Rinse and polish with a dry cloth. Do not allow the commercial oven cleaners. To safely clean surfaces:
water or cleaner to run down inside openings in
wash, rinse and then dry with a soft cloth.
the glass or the openings in the top of the oven
door while cleaning.
PROBLEM
“F-” AND A
NUMBER FLASH
IN THE DISPLAY
OVEN WILL
NOT WORK
OVEN LIGHT DOES
NOT WORK
FOOD DOES NOT
BROIL PROPERLY
FOOD DOES NOT
ROAST OR BAKE
PROPERLY
POSSIBLE CAUSE
●
This is
the
function error code. Press the
CLEARKWF
pad. Allow oven to
cool
1 hour. Place oven back into operation. If function
error
occurs
again,
disconnect
power
to
the
oven
and call for service.
●
The circuit breaker
in
your house has been tripped, or a fuse has been blown.
●
Oven controls not properly set.
●
Light bulb is loose or defective. Tighten or replace.
●
Button
operating
oven
light is broken,
Call
for service.
●
The oven controls are not properly set. See the Broiling section.
●
The door not left ajar as recommended.
* Improper shelf position being used.
●
Food is being cooked on a hot pan.
* Cookware is not suited for broiling.
●
Low voltage. See the Broiling section.
●
Aluminum foil used on the broiler pan grid has not been fitted properly
and slit as recommended.
●
The oven controls are not properly set. See the Baking
or
Roasting section.
●
Shelf
position is
not
correct.
~
Incorrect cookware of improper size is being used.
●
The oven thermostat needs adjustment. See the Adjust the Oven
Thermostat–
Do
It
Yourse~section.