Filter
Top Products
OPERATION
Changing temperature and time during cooking
• Press temp (11) during cooking. The temperature setting will switch in the following
order:
Press temp Setting
1 time low (slow cooking)
2 times warm (keeping food warm)
3 times high (faster cooking)
The icons ‘
low’, ‘warm’ or ‘high’ are flashing during setting; the time will not flash
and will not be changed.
• Press timer (12) during cooking. Increase or decrease the time setting with the arrow
buttons (13) or (15). Time will increase or decrease in 30 minute increments.
The time will flash during setting; the temperature icon will not flash and will not be
changed.
After setting, the time will continue to flash for 5 seconds.
NOTE: Cooking time may differ due to factors like room temperature or amount of food
in the non-stick insert (5). The cooking time can be adjusted any time.
End of cooking
• The end of the cooking process will be indicated by an audible tone. The cooker
switches to ‘warm’ and time counts up for 3 hours.
• A second audible tone indicates the end of the warming process. ‘3:00’ and ‘warm'
will flash. The LCD (10) switches to 25% brightness and the unit stops heating.
• You can also press (16) to stop the cooking process at any time. The slow cooker
will switch to standby mode. The power icon (16) switches to 25% brightness with
‘high’ and ‘04:00’ flashing.
• Disconnect the slow cooker from the wall outlet.
• To remove the tempered glass lid (2) always use pot holders to grasp the lid
handle (1) (ill.
d
).
• Always use pot holders when removing the non-stick insert (5) from the base unit (6)
(ill.
f
).
9
169200-IM-EN-07.indd 9 08.06.2009 10:53:52