Filter
Top Products
16
Consumer Support Troubleshooting Tips
Operating Instructions
Safety InstructionsInstallation Instructions
Preparing to install the refrigerator.
Read these instructions completely and carefully.
Water Supply to the Icemaker
The icemaker will have to be connected to a cold
water line.
You can order a GE water supply kit (containing
tubing, shutoff valve, fittings and instructions) by
visiting our Website at
www.GEAppliances.com
or
from Parts and Accessories, 800-626-2002.
Refrigerator Location
Do not install the refrigerator where the
temperature will go below 60°F (16°C)
because it will not run often enough to maintain
proper temperatures.
Install it on a floor strong enough to support it
fully loaded.
Clearances
Allow the following clearances for ease of
installation, proper air circulation and
plumbing and electrical connections:
Sides 1/8″ (4 mm)
Top 1″ (25 mm)
Back 1″ (25 mm)
Rollers
The rollers have 3 purposes:
Rollers adjust so the door closes easily when
opened about halfway. [Raise the front about
5/8″(15 mm) from the floor.]
Rollers adjust so the refrigerator is firmly
positioned on the floor and does not wobble.
Rollers allow you to move the refrigerator away
from the wall for cleaning.
Final leveling adjustments should be made after the
refrigerator has been installed.
To adjust the rollers:
Turn the roller adjusting screws
clockwise to raise
the refrigerator,
counterclockwise to lower
it. Use a
3/8″ hex socket or wrench, or an adjustable wrench.
Roller adjusting screw