Filter
Top Products
7
Consumer SupportTroubleshooting Tips
Operating InstructionsSafety Instructions
Installation Instructions
About the shelves and bins.
www.GEAppliances.com
Refrigerator Door Bins and Freezer Door Tilt-Out Bins
Large Bins
The larger refrigerator door bins and
freezer tilt-out door bins are adjustable.
To remove:
Lift the front of the bin straight
up, then lift up and out.
To replace or relocate:
Engage the back side
of the bin in the molded supports of the
door. Then push down on the front of the
bin. Bin will lock in place.
Small Bins
To remove:
Lift the front of the bin straight
up then out.
To replace:
Position the bin above the
rectangular molded supports on the door.
Then slide the bin down onto the support
to lock it in place.
The snugger
helps prevent tipping, spilling
or sliding of small items stored on the door
shelf. Place a finger on either side of the
snugger near the rear and move it back
and forth to fit your needs.
Not all features are on all models.
Refrigerator bin
Freezer tilt-out bin
Snugger
Freezer bin
Slide-Out Spillproof Shelf
The slide-out spillproof shelf allows you to
reach items stored behind others. The
special edges are designed to help prevent
spills from dripping to lower shelves.
To remove:
Slide the shelf out until it reaches the stop,
then press down on the tab and slide the
shelf straight out.
Press tab and pull shelf
forward to remove
To replace or relocate:
Line the shelf up with the supports and slide
it into place. The shelf can be repositioned
when the door is at 90° or more. To
reposition the shelf, slide the shelf past the
stops and angle downward. Slide shelf down
to the desired position, line up with the
supports and slide into place.
Make sure you push the shelves all the way back
in before you close the door.