Filter
Top Products
27
Installation Instructions
ATTACHING A BLOWER
TRANSITION DUCT
Use a blower transition duct for all downward
duct installations to connect to 6″ round
standard ductwork. This 3
1
⁄4″ x 10″ rectangle
to 6″ round transition duct is available at
your local building supply store.
Install the transition duct to the blower outlet.
Secure all joints with duct tape to assure an
airtight seal.
Screws
Screw
(on other
side)
13
CONNECTING THE DUCTWORK
Connect the ductwork prepared in Steps 5 and
6 to the blower transition duct.
14
INSTALLING THE COOKTOP