Filter
Top Products
How toUse the Minute/Second Timer
The MIN/SEC TIMER has three
timing functions:
● It operates as a minute timer.
● It can be set to delay cooking.
● It can be used as a hold setting
after defrosting.
The MIN/SEC TIMER operates
without microwaveenergy.
How to 13mea 3-Minute
Phone Call
1. TouchMIN/SEC TIMER pad.
The display shows :0 and
“ENTER TIME” flashes.
2. Touchnumber pad 3 and MIN (for
3 minutes and no seconds). Display
shows 3:00 and “TIME” flashes.
3. Touch START.Display shows
“TIME” and time counting down.
4. When time is up, oven signals,
flashes “EndJ’ and display shows
time of day.
Programming a HOLD
TIME
The Minute/Second Timer can also
be used to program “hold time”
between microwavecooking
fimctions. The time can range from
one second to 99 minutes and 99
seconds. A HOLD, or “standing”
time may be found in some of your
own recipes or cookbook.
Programming Delayed
Cooking
Todelay cooking up to 99 minutes
and 99 seconds, touch TIME COOK
I & II, TEMP COOK/HOLD or
AUTO ROASTand enter cook time,
temp, or code. Touch MIN/SEC
TIMER and enter number ofminutes
todelaycooking.TouchST~. Tmer
counts down to zero and cooking
begins. When delaying temperature
or AutoRoastcooking,be sure probe
is in food before pressing START.
How to Manual Defrost,
Hold and Time Cook
Let’ssayyouwantto defrosta frozen
casserole for 15minutes, hold for
10minutes and then Time Cook for
25 minutes. Here’show to do it:
Step 1: Takecasserole from freezer
and place in oven.
Step2: TouchTIME DEFROSTpad.
The display shows :0 and
“POWER 3:’ “ENTER DEF
TIME” flashes.
Step 3: Touchpads 1,5 and MIN
for 15minutes defrostingtime. 15:00
appears on display. (Defrosting is
automatically set on power level 3
but can be changed by touching the
POWER LEVEL pad and the
desired power level.)
Step 4: Set standing or hold time
by touching MIN/SEC TIMER.
The display shows :0 and
“ENTER TIME” flashes.
Step 5: Touch 1,0 and MIN to hold
for ten minutes. 10:00appears on
display and “TIME” flashes.
Step 6: Touch TIME COOK I & II
pad. The display shows :0 and
“POWER 10:’“ENTER COOK
TIME” flashes.
7
Step %Touch 2,5 and MIN for
twenty-fiveminutes of cookingtime.
“COOK TIME” flashes and 25:00
and “POWER 10”appearon display.
Step8: TouchST~. “DEF TIME”
and 15:00 counting down show
on display. As each function is
automatically performed oven
display shows instructions entered
and the function.
Step 9: When time is up, the oven
signals and flashes “End?’
Questions and Answers
Q. What will happen if I
accidentally reversemy defrost,
hold and cook instructions?
A. The oven will automatically
rearrange your program. Defrosting
will alwayscome first, then hold,
and then the cooking function.
Q. Can I defrost and hold only?
A. Yes. Sometimes you may only
want to defrost a food, hold it, and
cook it later. All you need to do is
program in Defrost and amount of
time. Then program Hold and the
amount of time. Be sure to put the
thawed dish in the refrigerator
promptly.
NOTE: Let foods remain at room
temperature only as long as safe.
Times will vary.
Q. I programmed my oven for a
specific defrosting time but it
defrosted longer than necessary.
What happened?
A. When instructions conflict,
the oven carries out the last
instruction. Youmay have set the
oven to Defrost for 4 minutes,
Hold/Time for 2 minutes, and then
Defrost for 6 minutes. In this case,
the ovenwouldDefrostfor 6 minutes
and Hold/Time for 2 minutes.