GE JBP48 Range User Manual


 
Safety Instructions
Operating Instructions
Safety Instructions
Operating Instructions Care and Cleaning
Troubleshooting Tips Consumer Support
www.GEAppliances.com
Problem Possible Causes What To Do
Control signals after You forgot to enter Touch the BAKE pad and desired temperature or the
entering cooking time a bake temperature SELF CLEAN STD/LO pad and desired clean time.
or delay start or cleaning time.
Clock and timer A fuse in your home may Replace the fuse or reset the circuit breaker.
do not work be blown or the circuit
breaker tripped.
Oven controls See the Using the clock and timer section.
improperly set.
Oven light does Light bulb is loose Tighten or replace the bulb.
not work or defective.
Switch operating light Call for service.
is broken.
Oven temperature Oven thermostat See the Adjust the oven thermostat—Do it yourself!
too hot or too cold needs adjustment. section.
Oven will not work A fuse in your home may Replace the fuse or reset the circuit breaker.
be blown or the circuit
breaker tripped.
Oven controls See the Using the oven section.
improperly set.
Plug on range is not Make sure electrical plug is plugged into a live,
completely inserted in the properly grounded outlet.
electrical outlet.
Oven too hot. Allow the oven to cool to below locking temperature.
Oven will not Oven controls See the Using the self-cleaning oven section.
self-clean improperly set.
“Crackling” or This is the sound of the This is normal.
“popping” sound metal heating and cooling
during both the cooking and
cleaning functions.
Excessive smoking Excessive soil. Touch the CLEAR/OFF pad. Open the windows to
rid the room of smoke. Wait until the LOCKED DOOR
light goes off. Wipe up the excess soil and reset the
clean cycle.
Oven door will Oven too hot. Allow the oven to cool below locking temperature.
not open after a
clean cycle
Oven not clean The oven temperature is too All the range to cool to room temperature and
after a clean cycle high to set a self-clean operation. reset the controls.
Oven controls not properly set. See the Using the self-cleaning oven section.
Oven was heavily soiled. Clean up heavy spillovers before starting the clean
cycle. Heavily soiled ovens may need to self-clean
again or for a longer period of time.
25