GE JBPA48 Range User Manual


 
The oven controls serve several purposes. Follow the directions for the
controls that apply to your model.
T
O
Set the
Clock
(on some models)
Minute Timer
(on some models)
To set the clock, push the knob
\ ’11 /
The Minute Timer has been combined with the range
in and turn the clock hands to
the correct time. The Minute
\
Timer pointer will move also. Let
9
10
the knob out, then turn the
Minute Timer pointer to OFF.
@
clock. Use it to time all your precise cooking operations.
04
0
You’ll recognize the Minute Timer as the pointer which
3
3
is different in color and shape than the clock hands.
.
0
~h
&
0
QO
1
\
>
To Set the Minute Timer
/G\
To set the Minute Timer, turn the center knob,
without
pushing it in.
YOLI
can set the time for up to 4 hours.
At the end
of the set time, a buzzer sounds to tell you
time is up. Turn knob, without pushing in, until
pointer reaches OFF and buzzer stops.
Automatic Clock
(on some models)
To
Set the Clock
The clock must be set for the automatic
ot’en
timing
functions to work properly. The time of day cannot be
changed during
a
Timed Baking
m
Self-Cleaning cycle.
c
CLOCK
1. Press the CLOCK pad.
2. Press the HOUR and MIN. pads
to set the time of day.
Timer
(on some models)
To Set the Timer
The timer is a minute timer only.
The timer does not control oven operations.
The maximum setting
cm
the timer is 11 hours
c
o
!\”:!
and 59 minutes.
2,
Press the TIMER ON/OFF pad.
Press the HOUR and MIN. pads until the
amount of time you want shows in the
display. The timer will start automatically
within a few seconds of releasing the pad.
To Reset the Timer
To Cancel the Timer
If the display is still showing the time remaining, you
To cancel the timer, the remaining time must be in
may change it by pressing the
HOU’R
and
MINT.
pads
the display. To recall the time remaining, press the
until the time you want appears in the display.
TINIER
OhT/OFF
pad once. To cancel the timer press
If the remaining time is not in the display, recall the
the TIMER ON/OFF pad again.
remaining time by pressing the
TIMER ON/OFF pad
(continued next page)
and then pressing the HOUR and MIN. pads
until
the
new time you want shows on the display.
11